2P + E surge arrester socket with overvoltage limiter
Advantages of the product:
    With protective eclipses
    Supplied with fuse
Main Features :
    2P + E socket with overvoltage limiter and filter
    In addition to the protection provided by this lightning protection socket, modular lightning protection is highly recommended With protective eclipses
Product Features :
    6 A - 250 V ~ - 50-60 Hz.
    Complies with NF EN 61 643-11
    Supplied with 5 x 20 - 6.3 A fuse ref. 102 63
    Visualization of the operation of the surge arresters by indicator
    Nominal discharge current (In): 1,5 kÂ
    Maximum discharge current (Imax): 3 kÂ
    Protection level (up): - 1 kV between P and N (Md) - 1.2 kV between P, N and T (Mc)
    Open circuit voltage (Uoc): 4 kV
    Leakage current 1 mA

Size and resolution: 15.6 "1366x768 30pin
Surface: TFT with glossy or matt coating depending on availability
Connector: Located at the bottom right (See photo)
Backlight type: LED

Display size (diagonal): 50.8 cm 20 "(visible image size: 20")
Optimal resolution: 1600 x 900 at 60 Hz
Contrast ratio: 1000: 1 (standard)
Brightness: 250 cd / m2 (standard)
Response time: 5 ms (black to white)
View angle: 160 ° (vertical) / 170 ° (horizontal)
Color support:

Color depth: 16.7 million colors

Pixel spacing: 0.284mm
Predefined display area (horizontal x vertical): 442.8 mm x 249.1 mm 17.43 "x 9.81"
Backlight technology: LED
Screen type, surface: TN (Twisted Nematic), anti-reflective with 3H hard coating
Aspect Ratio: Widescreen (16: 9)
Screen coating: Anti-reflective with 3H hard coating
Screen type: Wide flat screen
connectivity
1 DVI-D (Digital Visual Interface) Dual Link connector with HDCP
1 VGA (Video Graphics Array) port

Screen size: 200x200cm, 111 "/ 283cm

Ratio of aspect: 1: 1

Gain: 1.0

Manual mode

Assembly Type: Ceiling Mount, Wall Mount

edge coverage: Yes

Clipping voltage: 1200V (Ph-N, Ph-G)
Number of shots: 5, Current peaks

maximum: 15,000 A,

Cord length: 1 meter
Protection of 3 drivers:
Ph / N circuit: 7,500 A
Ph / T circuit: 7,500 A
(maximum impact on copper wiring = 6000 Volts)
Response time: less than 1 nanosecond
Noise reduction: 100 kHz to 100 MHz
Attenuation: up to 32 dB
Conditions of use: 250 VAC / 10A / 50/60 Hz.

Max: 2500 Watts in use
Resettable circuit breaker: 10A

Prise en charge des couleurs : 16,7 millions de couleurs