FEATURED PRODUCTS

TRANSCEIVER

TRANSCEIVER

Active filters

TRANSCEIVER TP-LINK SC RJ45 10/100 MULTI MODE

0 Review(s)
Price FCFA60,000.00
IN STOCK

Complies with 802.3u 10 / 100Base-TX and 100Base-FX standards
LFP (Link Fault Pass Through) and FEF (Far End Fault) functions reduce losses caused by link interruption when necessary
Allows configuration of the switch in the alternate and simultaneous bidirectional link modes of the FX port
Extension of the distance by optical fiber: up to 2 km
Limited lifetime warranty
Technical support provided by expert French-speaking advisers on TP-LINK products, reachable by phone or email

TRANSCEIVER TP-LINK MC110CS FIBRE OPTIQUE 10/100 SC SINGLE MODE

0 Review(s)
Price FCFA49,000.00
IN STOCK

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.
- Extends fiber distance up to 20-60km

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK’s 19’’ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs.

TPLINK WIFI SIGNAL REPEATER

0 Review(s)
Price FCFA30,000.00
IN STOCK

Standards and Protocols : IEEE 802.11b/g/n
Plug Type : EU
Wireless Type : 2,4GHz, 1T1R
Input voltage : 100 - 120VAC, 15A
Output voltage : 100 - 120VAC, 15A
Maximum Load : 15A
Maximum Power : 1.8KW
Certification : RoHS, EAC, CE
Package Contents : Smart Plug HS100, Quick Start Guide
System Requirements : Android 4.1 or higher, iOS 8 or higher

SIGNAL REPEATER LINKSYS N600 WIRELESS 802.11a / b / g / n

0 Review(s)
Price FCFA60,000.00
IN STOCK

Model Name : Linksys RE4100W
Network Standards : IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Radio Frequency Bands : 2.4 & 5GHz
Ports : Audio, Power
LEDs : Wi-Fi Protected Setup
Buttons : Reset, Wi-Fi Protected Setup
Max. Link Rate : 300 Mbps
Platform Compatibility:Windows XP,  Windows Vista 32/64, Windows 7 32/64, Windows 8 32/64, Windows 8.1 32/64, Mac OS X , Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks


TRANSCEIVER DLINK DMC-700 MULTIMODE 1000BASE-SX SC-RJ45

0 Review(s)
Price FCFA98,000.00
IN STOCK

This D-Link DMC-700SC converter converts 1000Base-T twisted pair Gigabit signals to 1000Base-SX multimode fiber Gigabit signals. The maximum distance supported by the fiber cable is 550 meters. This converter has 1 RJ-45 twisted pair port and 1 fiber (SC) port.
 
Main Features :

     Full Duplex mode
     Connectivity: IEEE 802.3ab 1000BASE-TX, IEEE 802.3z 1000BASE-SX
     Dimensions: 120.7 x 88.9x 25.4 mm / 0.3 kg

TPLINK WIFI SIGNAL REPEATER

0 Review(s)
Price FCFA45,000.00
COMMAND
Nous contactez

Transforms the white WiFi zones of your home into a WiFi zone with a total speed of up to 750 Mbps
A more stable WiFi network that operates on the 2.4 GHz WiFi band (300 Mbps) and the 5 GHz band (433 Mbps)
Smart light helps you find the best location for optimal WiFi coverage
The Access Point Mode replaces the faulty WiFi performance of your box.
Compatible with all boxes on the market, and WiFi routers / access points

TP-LINK MC112CS FIBER OPTIC SINGLE MODE TRANSCEIVER

0 Review(s)
Price FCFA65,000.00
COMMAND
Nous contactez

WDM Fast Ethernet Media Converter
MC112CS

Complies with 802.3u 10 / 100Base-TX and 100Base-FX standards
LFP (Link Fault Pass Through) and FEF (Far End Fault) functions reduce losses caused by link interruption when necessary
Adoption of WDM technology allowing the transmission and reception of data on a single fiber.

TRANSCEIVER TP-LINK SC RJ45 GIGABIT MULTIMODE

0 Review(s)
Price FCFA60,000.00
COMMAND
Nous contactez

- Complies with IEEE 802.3ab and IEEE 802.3z
- Provides switch configuration of Force /Auto transfer mode for FX port.
- Extends fiber distance up to 0.5km

The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs.