Features
- Adopts AlignTM technology, with transmit speed up to 150Mbps;
- Provides PCI Express connector having a wider compatibility with any standard PCI Express slot;
- Supports QSS function, complying with WPS for worry free wireless security;
- Supports 64/128/152-bit WEP, WPA /WPA2/WPA-PSK/WPA2-PSK(TKIP/AES), supports IEEE 802.1X;
- Supports roaming technology, guaranteeing uninterrupted wireless connection;
- Supports Ad-Hoc/Infrastructure modes;
- Seamlessly compatible with 802.11n/b/g devices;
- Supports Windows 2000, Windows XP 32/64bit, Vista 32/64bit.

- Up to 150Mbps wireless transmission rate
- Provides PCI Express interface
- Advanced secure connection with WPA/WPA2 encryption
- Bundled utility enables easy management

Complies with 802.3u 10 / 100Base-TX and 100Base-FX standards
LFP (Link Fault Pass Through) and FEF (Far End Fault) functions reduce losses caused by link interruption when necessary
Allows configuration of the switch in the alternate and simultaneous bidirectional link modes of the FX port
Extension of the distance by optical fiber: up to 2 km
Limited lifetime warranty
Technical support provided by expert French-speaking advisers on TP-LINK products, reachable by phone or email

operation in the 2.4 GHz frequency band

2x2 MIMO standard

throughput of over 150+ Mbps

easy to install

compact structure

modern design

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.
- Extends fiber distance up to 20－60km

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK’s 19’’ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs.

TG-3468 10/100/1000Mbps Gigabit PCIe Network Adapter is a highly integrated and cost-effective 32-bit Gigabit PCIe Ethernet Adapter which is fully compliant with IEEE 802.3, IEEE 802.3u and IEEE 802.3ab specifications.

The PCIe Gigabit Network Adapter TG-3468 is a high performance adapter designed for the high-speed PCI Express Bus Architecture. Designed to support 10/100/1000Mbps network speed Auto-Negotiation, 802.3x flow control and Wake-on-LAN technology. TG-3468 Gigabit PCIe Network Adapter is a highly integrated and cost-effective Gigabit Ethernet Adapter which is a good selection to upgrade your network.
- Wake-on-LAN supporting
- Auto-Negotiation and Auto MDI/MDIX
- Supports IEEE802.3x Flow Control for Full-duplex Mode and backpressure for Half-duplex Mode
- Supports IEEE 802.1p Layer 2 Priority Encoding and IEEE802.1q VLAN tagging

Installable in a PC equipped with PCI slots
Product Type: PCI Card Ethernet Network Adapter
Type of facility: Network adapter
Form factor: Plug-in card
Interface type (bus): PCI
Data transfer rate: 1 Gbits / s
Wiring Type: 10Base-T Ethernet, 100Base-TX Ethernet, 1,000Base-T Ethernet
Data link protocol: Ethernet, Fast Ethernet, Gigabit Ethernet
Compliance with standards: IEEE 802.1Q, IEEE 802.3x

Plug-and-play operation
     8 Gigabit 10/100/1000 Mbps ports, including 4 PoE
     Automatic MDI / MDIX cross detection for all ports
     Silent and fanless, it is suitable for any type of environment
     Half duplex / full duplex bidirectional transmission mode for ethernet / Fast ethernet speeds
     IEEE 802.3x flow control
     support for cable diagnostics
     support for extended frames up to 9,720 KB
     Device: 0 to 50 ° C. External power adapter: 0 to 40 ° C

Management characteristics
Switch Type: Unmanaged
Switch bank: L2
Quality of service (QoS): Yes
Web-based management: No
Quantity of basic RJ-45 Ethernet switching ports: 16
Basic RJ-45 Ethernet port type: Fast Ethernet (10/100)
Ethernet copper cabling technology: 100BASE-TX, 10BASE-T
Fast Ethernet (copper) Number of ports: 16
Network standards: IEEE 802.1p, IEEE 802.3, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Full duplex: Yes
HOL function against overloading of file headers: Yes
Flow control assistance: Yes
Auto MDI / MDI-X: Yes
Switching capacity: 3.2 Gbit / s
Throughput: 1.4 Mpps
Number of lines: 4
Jumbo Frames Support: Yes
Certification: UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A, FCC Class B
Ethernet connection, supporting power via this port (PoE): No

Switch Type: Unmanaged
RJ-45 Ethernet port type: Fast Ethernet (10/100)
Number of RJ45 Ethernet ports: 16
16 10/100 Mbps auto-negotiation RJ45 ports with Auto MDI / MDIX support
Green Ethernet technology that can generate up to 70% energy savings
IEEE 802.3x flow control ensuring the integrity of the transferred data
Plastic housing, designed to be installed on a desk or hung on a wall
Plug and Play, no configuration required

Standard : Filaire                                          Taux de transfert :10/100 Mbits  Nbre port LAN 1000 Mbits  : 5                                                                        Mémoire interne : 64 Mo                                            Type d' antenne :   aucun