An economical way to convert a 9-pin female port to a 9-pin male port
Easy to use and install
Small footprint

45x22.5 half-faceplate - 1 RJ-45 port
- Format 45 x 22.5 mm
- Protection flap
- To be fitted with base in keystone format
- To be mounted on a chute or 45 mm high box
- Twin assembly of 2 half-faceplates in 45 x 45

Universal shelf for bay depth 600 mm
Shelf depth adjustable from 420 to 570 mm

Load 35 kg

TG-3468 10/100/1000Mbps Gigabit PCIe Network Adapter is a highly integrated and cost-effective 32-bit Gigabit PCIe Ethernet Adapter which is fully compliant with IEEE 802.3, IEEE 802.3u and IEEE 802.3ab specifications.

The PCIe Gigabit Network Adapter TG-3468 is a high performance adapter designed for the high-speed PCI Express Bus Architecture. Designed to support 10/100/1000Mbps network speed Auto-Negotiation, 802.3x flow control and Wake-on-LAN technology. TG-3468 Gigabit PCIe Network Adapter is a highly integrated and cost-effective Gigabit Ethernet Adapter which is a good selection to upgrade your network.
- Wake-on-LAN supporting
- Auto-Negotiation and Auto MDI/MDIX
- Supports IEEE802.3x Flow Control for Full-duplex Mode and backpressure for Half-duplex Mode
- Supports IEEE 802.1p Layer 2 Priority Encoding and IEEE802.1q VLAN tagging

Installable in a PC equipped with PCI slots
Product Type: PCI Card Ethernet Network Adapter
Type of facility: Network adapter
Form factor: Plug-in card
Interface type (bus): PCI
Data transfer rate: 1 Gbits / s
Wiring Type: 10Base-T Ethernet, 100Base-TX Ethernet, 1,000Base-T Ethernet
Data link protocol: Ethernet, Fast Ethernet, Gigabit Ethernet
Compliance with standards: IEEE 802.1Q, IEEE 802.3x

Plug-and-play operation
     8 Gigabit 10/100/1000 Mbps ports, including 4 PoE
     Automatic MDI / MDIX cross detection for all ports
     Silent and fanless, it is suitable for any type of environment
     Half duplex / full duplex bidirectional transmission mode for ethernet / Fast ethernet speeds
     IEEE 802.3x flow control
     support for cable diagnostics
     support for extended frames up to 9,720 KB
     Device: 0 to 50 ° C. External power adapter: 0 to 40 ° C

General features
Type : AVR
Power capacity : 3000VA / 2400W
Output Power Factor : 0.80
Input
Input Voltage Range : 110-280 VAC or 150-270 VAC
Output
Nominal Output Voltage : ±10%
Technical details
Protection : Surge Rating 312J+190J
Over-voltage, Under-voltage, Over-heat, Over-current, Surge, Spike Suppression
LED Indicators : Normal Mode, AVR Mode, Delay Time, Fault
LCD Indicators : Input and Output Voltage
Efficiency
LINE mode full Load : 95.0%
Batteries and autonomy time
Batteries : N/A
Connections and communication
CEE 7/3 (Type F) Outlet : 1
IEC C19 Outlet : 1
Input : C20
Environment
Noise Level : No Fan
Temperature    0°C – 40°C
Humidity    0% - 90% RH (non-condensing)

MULTIPLE EMERSON PDU DI-STRIP 15 SOCKETS EN C13

Features
- 10 Single-Touch Speed Dial Memories
- 16-Digit & 16-Character LCD Display with 5-Level Contrast Control
- 16 Ring Melodies Selectable
- 76 Caller ID Memories
- 80 Phone Book Entries, 16 Characters for Each Name, 20 Digits for Each Number
- Automatic Call Timer
- Battery-Free Solution
- Call Back from Caller ID Memory
- Cellular Phone RFI Noise Immunity
- Business Grade High-Quality Speakerphone
- Data Port : RJ11 Jack
- Flash Time (100/200/300/400/600/900ms) Adjustable
- FSK/DTMF CLIP
- Hold with Mute, Music & Extension Release
- Intelligent Auto Busy Redial
- Last 16 Dialed Numbers Review and Redial
- Message Waiting and Incoming Call Indication
- On-Hook Delay 1.2 Seconds for PBX to Prevent Ring Back
- Speakerphone and LCD Display Work well with Line Power Alone, Without Battery
- Speed Dial Memories & Phone Book Entries will be Saved During Power Failure

USB 3.0 W / O Stand Kit

DELL EURO Simple E-Port II.
Connectivity technology: Docking station, Host interface: USB 2.0.
Product color: Black,
Brand compatibility: Dell,
Compatibility: Latitude E5430, E5530, E6230, E6330, E6430, E6430 ATG, E6530.
AC input voltage: 100-240 V,
AC input frequency: 50 - 60 Hz.
Width: 200 mm,
Depth: 170 mm, Height: 53.7 mm.
Description of output power: 130W

Value for money and small size! | The LSZH 2 mm thick optical jumper is ideal for internal use in network cabinets. Its small thickness with a diameter of only 2 millimeters will save a lot of space on high density installations. The 2mm optical jumper is also more economical, but without sacrificing quality, each jumper comes with its test report. | Available in different lengths and with different combinations of connectors | | More product: | Important space saving for high density brewing | More economical | Test report with each garter | | Main features: | | Singlemode fiber duplex cable OS2 9 / 125um