Product description: Cisco - SPA112
Product Type: Adapter
Compatible: For phone
Number of ports: 2 ports
Supported network protocols: IPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
VPN support: 802.1p
Supported security algorithm: SSL / TLS
Authentication method: SIP
Power requirements: AC, 100 - 240 V, 50 - 60 Hz, DC, 5 V, 2 A

Top quality product.
IEC C14 male. IEC C19 female.
Nominal voltage: 110 V-250 V. Nominal current: 10 A-16 A.
Nominal power: 2500 W. Flammability class: 94-V0. Material: nylon.
Contents: 1 adapter C14 to C19.

2P + E surge arrester socket with overvoltage limiter
Advantages of the product:
    With protective eclipses
    Supplied with fuse
Main Features :
    2P + E socket with overvoltage limiter and filter
    In addition to the protection provided by this lightning protection socket, modular lightning protection is highly recommended With protective eclipses
Product Features :
    6 A - 250 V ~ - 50-60 Hz.
    Complies with NF EN 61 643-11
    Supplied with 5 x 20 - 6.3 A fuse ref. 102 63
    Visualization of the operation of the surge arresters by indicator
    Nominal discharge current (In): 1,5 kÂ
    Maximum discharge current (Imax): 3 kÂ
    Protection level (up): - 1 kV between P and N (Md) - 1.2 kV between P, N and T (Mc)
    Open circuit voltage (Uoc): 4 kV
    Leakage current 1 mA

General features
Type : AVR
Power capacity : 3000VA / 2400W
Output Power Factor : 0.80
Input
Input Voltage Range : 110-280 VAC or 150-270 VAC
Output
Nominal Output Voltage : ±10%
Technical details
Protection : Surge Rating 312J+190J
Over-voltage, Under-voltage, Over-heat, Over-current, Surge, Spike Suppression
LED Indicators : Normal Mode, AVR Mode, Delay Time, Fault
LCD Indicators : Input and Output Voltage
Efficiency
LINE mode full Load : 95.0%
Batteries and autonomy time
Batteries : N/A
Connections and communication
CEE 7/3 (Type F) Outlet : 1
IEC C19 Outlet : 1
Input : C20
Environment
Noise Level : No Fan
Temperature    0°C – 40°C
Humidity    0% - 90% RH (non-condensing)

Connectivity
Connectivity technology: Wired
Internal: Yes
Host interface Descriptions of the products host interface Ethernet
Interface: Ethernet
Bandwidth
Data transfer rate (maximum): 100 Mbit / s
Network
Ethernet / LAN: Yes
Wiring technology: Type of cable technology performance; including the fiber or cable type: 10 / 100BaseT (X)
Energy management
Input voltage: 7 - 12 V
Power consumption: Amount of power used by this model; expressed in watts: 3.6 W

Features
- 10 Single-Touch Speed Dial Memories
- 16-Digit & 16-Character LCD Display with 5-Level Contrast Control
- 16 Ring Melodies Selectable
- 76 Caller ID Memories
- 80 Phone Book Entries, 16 Characters for Each Name, 20 Digits for Each Number
- Automatic Call Timer
- Battery-Free Solution
- Call Back from Caller ID Memory
- Cellular Phone RFI Noise Immunity
- Business Grade High-Quality Speakerphone
- Data Port : RJ11 Jack
- Flash Time (100/200/300/400/600/900ms) Adjustable
- FSK/DTMF CLIP
- Hold with Mute, Music & Extension Release
- Intelligent Auto Busy Redial
- Last 16 Dialed Numbers Review and Redial
- Message Waiting and Incoming Call Indication
- On-Hook Delay 1.2 Seconds for PBX to Prevent Ring Back
- Speakerphone and LCD Display Work well with Line Power Alone, Without Battery
- Speed Dial Memories & Phone Book Entries will be Saved During Power Failure

SIM card reader
To archive or duplicate the directory and SMS stored on your standard sim cards.

Functions:
Reading, editing and writing of contacts and sms from the provided software.
Save information for transfer to another sim card.

Specifications:
Support for standard size sim cards.
USB connection compatible with USB 1.1 (12Mbps)
Windows 98, 2000, XP compatible software

Docking station to add ports to your laptop or desktop
- 3 x USB 2.0
- 1 x PS / 2 keyboard port
- 1 x PS / 2 Mouse port
- 1 x Serial Port Serial DB9 Male
- 1 x DB25 Female Printer Port
- 1 x 3.5mm headphone jack
- 1 x 3.5mm microphone jack
Dimension P63 x H27 x L166mm
Supplied with USB A / B cable and 230V / 5V 0.5A power adapter

Size and resolution: 15.6 "1366x768 30pin
Surface: TFT with glossy or matt coating depending on availability
Connector: Located at the bottom right (See photo)
Backlight type: LED

Hardware Features
• Pixel-based display: 128 x 64 monochrome LCD graphical display with backlight
• Dedicated illuminated buttons for:
– Audio mute on/off
– Headset on/off
– Speakerphone on/off
• 4-way rocking directional knob for menu navigation
• Voicemail message waiting indicator (VMWI) light
• Voicemail message retrieval button
• Dedicated hold button
• Settings button for access to feature, setup, and configuration menus
• Volume control rocking up/down knob controls handset, headset, speaker, ringer
• Standard 12-button dialing pad
• High-quality handset and cradle
• Built-in high-quality microphone and speaker
• Headset jack: 2.5 mm
• LED test function
• Two Ethernet ports with integrated Ethernet switch: 10/100BASE-T RJ-45
• 802.3af-compliant PoE
• Optional 5 VDC universal (100-240V) switching; power supply is ordered separately (Cisco PA100

Screen size: 200x200cm, 111 "/ 283cm

Ratio of aspect: 1: 1

Gain: 1.0

Manual mode

Assembly Type: Ceiling Mount, Wall Mount

edge coverage: Yes

number of usb ports 2.0: 7

• USB specification version 2.0

(data rates up to 480 Mbps)
• USB specification version 1.1 (data rates up to 12 Mbps)
• OHCI
• UHIC
• EHCI
Interfaces • Seven USB Type A USB (female) ports, white • USB Type B (female) port upstream
Connectivity Rules • Up to 127 devices
• Up to 5 cascading hubs
Power LED • Bus Powered (Blue):
• Standard charging mode
• Self-powered (green):
• Standard charging mode
• Fast charge mode
Supplied charging current1 • Standard mode:
• 500 mA total for the seven front ports
• Fast charge mode1
• Max. 1.5 A each for charging the battery
1.2 compliant devices
• Max. 2.4 each for iPad / iPhone
Power consumption • 5 V / 3 A DC