Characteristics :
- Category: CAT. 6
- Frequency: 250 MHz
- Impedance: 100 ohms
- Conductor: copper-coated aluminum (CCA)
- Shielding: general with aluminum foil
- Wiring standard: compatible with ANSI / TIA 568C.2 - ISO 11801
- Sheath: PVC
- Packaging: individual sachet
- Storage and use temperatures: -20 ° to + 60 ° C
- Not suitable for PoE applications

2P + T pre-wired sockets
     Connection by automatic terminals
     For installation in flush-mounting box, surface frame, workstation kit, floor box, nurse unit, desk block, column and chute
     Sockets inclined at 45 ° - IK 07
     4 x 2P + T
     8 modules
     White
Legrand - Quadruple socket outlet 2P + E inclined at 45DEG prewired IK07 Mosaic 8 modules with automatic terminals - white Reinforced impact resistance: index IK07
Franco-Belgian standard, 16A, 230V

NITRAM SURGE PROTECTOR MULTI-OUTLET BOC 6 OUTLET 10A Input Voltage Range (Vac): 200 ~ 250 Input Frequency (Hz): 50/60 Maximum Input Current (A): 10 Input Connector Type: FR Output Voltage (V): Depends on Input Overload Protection : Circuit Breaker Over Current Protection (A): 10 Outlet(s) - Total: 6 Outlet Type: FR x 6 Surge Suppression (Joules): 350 Maximum Surge Voltage (V): 6000 Maximum Surge Current (A): 7500 Maximum Surge Current (L-N, L-G, N-G) (A): Line to Neutral (L-N): 7500 Clamping Voltage (L-N, L-G, N-G) (V) : Line to Neutral (L-N): 1200 LED Indicators: Surge Protected

Product details
Legrand - Double 2P + E 45DEG pre-wired keyed socket IK07 Mosaic 4 modules with automatic terminals - red Reinforced impact resistance: IK07 index
Franco-Belgian standard, 16A, 230V

Mosaic program

Advantages of the product:
Equipped with a label holder to identify the destination or source
Suitable for high speed and high frequency connection
Main Features
RJ 45 Cat. 6
Sockets with LCS² connector for quick connection without tools. Accept AWG 22 to AWG 26 single-strand and AWG 26 multi-strand cables
Identification of contacts by double color code and numbers 568 A and B
Compliant with ISO / IEC 11801 ed. 2.0, EN 50173-1 and EIA / TIA 568
Product Features
FTP sockets
2 modules

Advantages of the product:
Reduced packaging for easy transport
Accepts all Mosaic Program devices
Easy cable management
Discretion guaranteed in strong current
Save time
Easy access for maintenance
Effortless cover installation
Soft cover, conforms to the corners
Quality, finish and meeting the standard
Product specifications
Direct clipping chutes
1 compartment trunking
Direct clip-on trunking Can be used with all Mosaic Program devices. Includes: - 1 body - 1 wide cover 45 mm Long. 2 m
50 x 80
IP 40
IK 07
Complies with standard NF EN 50085-2-1

Characteristics :
- Category: CAT. 6
- Frequency: 250 MHz
- Impedance: 100 ohms
- Conductor: copper
- Shielding: general with aluminum foil
- Wiring standard: ANSI / TIA 568C.2 - ISO 11801
- Sheath: PVC
- Packaging: individual sachet
- Storage and use temperatures: -20 ° to + 60 ° C

MONITEUR LENOVO THINK VISION 21.5'' s22i-30 DHMI VGA 21.5" FHD (1920x1080) IPS display, Anti-glare 16:9 Extreme mode 4 ms response time 75Hz refresh rate 1000:1, 99% sRGB, 8-bit

NITRAM 1000VA IN LINE INVERTER BU1000E-FR Phase: Single-phase Format: Brick Technology: Line Interactive Compatibility with generator sets: Yes Nominal input voltage ( Vac ): 230 ± 10% Voltage range ( Vac ): 165 ~ 280 Frequency range ( Hz ): 50 ± 5, 60 ± 5 Frequency range detection: Automatic detection Nominal input current ( A ): 4.55 Connector type: Schuko (2P+T plug) Capacity (VA): 1000 Capacity (W): 600 Battery waveform: Simulated sine wave Battery voltage(s) ( Vac ): 230 ± 10 % Frequency on batteries ( Hz ): 50 ± 1%, 60 ± 1% Automatic voltage regulation (AVR): Undervoltage/overvoltage compensation Overload protection: Disconnector Number of outlets: 4 Output type: FR x 4 Ripple and surge protector outlets: 4 Nominal transfer time ( ms ): 4 Surge suppression ( Joules ): 125 EMI / RFI filtration: Yes

Advantages of the product:
Symmetrical DIN rail mounting
Supplied with insulating back plate and transparent front protective covers
Main Features :
Monoblock modular distributors
"Standard" distribution
Connection with or without Starfix tips
Resistance to glowing wire according to EN 60695-2-11: 960 ° C on the supports of active parts
Fixing on symmetrical rail or on plate by 2 screws
Supplied with insulating back plate and transparent front protective covers
Accepts Cab 3 marking on each bar
Possibility of adding an IP 2X terminal block to increase the number of earth or neutral feeders (except ref. 048 77)
Product Features :
Terminal four-pole
Equipped with 4 bars
Imax: 40 A
Number of connections per rigid bar: 11 x 1.5 to 4 // 2 x 6 to 16 mm²
Number of connections per flexible bar: 11 x 0.75 to 4 // 2 x 4 to 10 mm²
Peak DC: 20 kA
Icw: 3 kA
Number of modules: 6