2P + E surge arrester socket with overvoltage limiter
Advantages of the product:
    With protective eclipses
    Supplied with fuse
Main Features :
    2P + E socket with overvoltage limiter and filter
    In addition to the protection provided by this lightning protection socket, modular lightning protection is highly recommended With protective eclipses
Product Features :
    6 A - 250 V ~ - 50-60 Hz.
    Complies with NF EN 61 643-11
    Supplied with 5 x 20 - 6.3 A fuse ref. 102 63
    Visualization of the operation of the surge arresters by indicator
    Nominal discharge current (In): 1,5 kÂ
    Maximum discharge current (Imax): 3 kÂ
    Protection level (up): - 1 kV between P and N (Md) - 1.2 kV between P, N and T (Mc)
    Open circuit voltage (Uoc): 4 kV
    Leakage current 1 mA

Connectivity
Connectivity technology: Wired
Internal: Yes
Host interface Descriptions of the products host interface Ethernet
Interface: Ethernet
Bandwidth
Data transfer rate (maximum): 100 Mbit / s
Network
Ethernet / LAN: Yes
Wiring technology: Type of cable technology performance; including the fiber or cable type: 10 / 100BaseT (X)
Energy management
Input voltage: 7 - 12 V
Power consumption: Amount of power used by this model; expressed in watts: 3.6 W

Features
- 10 Single-Touch Speed Dial Memories
- 16-Digit & 16-Character LCD Display with 5-Level Contrast Control
- 16 Ring Melodies Selectable
- 76 Caller ID Memories
- 80 Phone Book Entries, 16 Characters for Each Name, 20 Digits for Each Number
- Automatic Call Timer
- Battery-Free Solution
- Call Back from Caller ID Memory
- Cellular Phone RFI Noise Immunity
- Business Grade High-Quality Speakerphone
- Data Port : RJ11 Jack
- Flash Time (100/200/300/400/600/900ms) Adjustable
- FSK/DTMF CLIP
- Hold with Mute, Music & Extension Release
- Intelligent Auto Busy Redial
- Last 16 Dialed Numbers Review and Redial
- Message Waiting and Incoming Call Indication
- On-Hook Delay 1.2 Seconds for PBX to Prevent Ring Back
- Speakerphone and LCD Display Work well with Line Power Alone, Without Battery
- Speed Dial Memories & Phone Book Entries will be Saved During Power Failure

Docking station to add ports to your laptop or desktop
- 3 x USB 2.0
- 1 x PS / 2 keyboard port
- 1 x PS / 2 Mouse port
- 1 x Serial Port Serial DB9 Male
- 1 x DB25 Female Printer Port
- 1 x 3.5mm headphone jack
- 1 x 3.5mm microphone jack
Dimension P63 x H27 x L166mm
Supplied with USB A / B cable and 230V / 5V 0.5A power adapter

Size and resolution: 15.6 "1366x768 30pin
Surface: TFT with glossy or matt coating depending on availability
Connector: Located at the bottom right (See photo)
Backlight type: LED

OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas - the perfect companion for our SXT, or for any other 802.11 standard device.

Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.

LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal - or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive. The OmniTIK runs RouterOS with all it’s features

Screen size: 200x200cm, 111 "/ 283cm

Ratio of aspect: 1: 1

Gain: 1.0

Manual mode

Assembly Type: Ceiling Mount, Wall Mount

edge coverage: Yes

number of usb ports 2.0: 7

• USB specification version 2.0

(data rates up to 480 Mbps)
• USB specification version 1.1 (data rates up to 12 Mbps)
• OHCI
• UHIC
• EHCI
Interfaces • Seven USB Type A USB (female) ports, white • USB Type B (female) port upstream
Connectivity Rules • Up to 127 devices
• Up to 5 cascading hubs
Power LED • Bus Powered (Blue):
• Standard charging mode
• Self-powered (green):
• Standard charging mode
• Fast charge mode
Supplied charging current1 • Standard mode:
• 500 mA total for the seven front ports
• Fast charge mode1
• Max. 1.5 A each for charging the battery
1.2 compliant devices
• Max. 2.4 each for iPad / iPhone
Power consumption • 5 V / 3 A DC

red laser pointer, easy to see on most backgrounds,

wireless range: 15 m

TECHNICAL CHARACTERISTICS
Dimensions (height x width x thickness):
37.8mm x 115.5mm x 27.4mm
Weight: 57 g

Receiver dimensions (height x width x thickness):
16.5mm x 58.6mm x 7.9mm
Receiver weight: 6 g

Black color

Laser class: Laser class 2

Max output level: Less than 1 mW

Wavelength: 640 ~ 660 nm (red indicator)

Battery type: 2 AAA batteries

Battery life (laser pointer): 20 hours maximum

Longevity of the battery (display device): 1050 hours maximum

Range of wireless connection: About 10 m 2

Wireless Technology: 2.4GHz Wireless Technology

Supported operating systems:
Windows Vista, Windows 7, Windows 8
Interface: USB

connectivity: with wire,

length of cable: 2.4 m,

micro noise,

connectivity: usb

Input impedance: 32 Ω

Sensitivity (headphones): 94 dBV / Pa +/- 3 dB

Sensitivity (microphone): -17 dBV / Pa +/- 4 dB

Frequency response (headphone): 20 Hz to 20 kHz

Frequency response (microphone): 100 Hz to 10 kHz

Length of the cable: 2,33 m

Connections: USB-A compatible (1.1, 2.0, 3.0)

usb parallel 1.8 m long

Connection To USB A Male
Centronics B connection
Bus-Powered Power Supply
USB 2.0 cable type
Parallel
Grey color
Packaging Box
PVC outer material
Connector Design - Side A Right
Length 1.8 m
Copper conductor material
Single shielding
USB 2.0 support technology
Adapter Cable Version
Max speed 1.2 Mbps
Connector Design - B Side Right