Characteristics :
- Category: CAT. 6
- Frequency: 250 MHz
- Impedance: 100 ohms
- Conductor: copper
- Shielding: general with aluminum foil
- Wiring standard: ANSI / TIA 568C.2 - ISO 11801
- Sheath: PVC
- Packaging: individual sachet
- Storage and use temperatures: -20 ° to + 60 ° C

1m Cat6 FTP. Cable length: 1 m
Standard cable: Cat6
Cable shield: F / UTP (FTP)
Connector 1: RJ-45
Connector 2: RJ-45
Connector Gender: Male / Male
Plating connector contacts: Gold
Cable color: GRAY

5m Cat6 FTP. Cable length: 5 m
Standard cable: Cat6
Cable shield: UTP
Connector 1: RJ-45
Connector 2: RJ-45
Cable color: GRAY

CORD PATCH RJ45 UTP CAT 6 2m BLACK

2m Cat6 FTP. Cable length: 2 m
Standard cable: Cat6
Cable shield: UTP
Connector 1: RJ-45
Connector 2: RJ-45

CABLE MULTI-STRANDED CAT 6 F / UTP Alu / Copper
CABLE BUDGET
CHARACTERISTICS :
- Category: CAT. 6
- Frequency: 250 MHz
- Impedance: 100 ohm
- Conductor: copper-coated aluminum
- AWG: 26/7
- Shielding: general with aluminum foil
- Outer sheath diameter: 6.0 mm
- Sheath: PVC

Model Name : Linksys RE4100W
Network Standards : IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Radio Frequency Bands : 2.4 & 5GHz
Ports : Audio, Power
LEDs : Wi-Fi Protected Setup
Buttons : Reset, Wi-Fi Protected Setup
Max. Link Rate : 300 Mbps
Platform Compatibility:Windows XP,  Windows Vista 32/64, Windows 7 32/64, Windows 8 32/64, Windows 8.1 32/64, Mac OS X , Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks

This D-Link DMC-700SC converter converts 1000Base-T twisted pair Gigabit signals to 1000Base-SX multimode fiber Gigabit signals. The maximum distance supported by the fiber cable is 550 meters. This converter has 1 RJ-45 twisted pair port and 1 fiber (SC) port.
 
Main Features :

     Full Duplex mode
     Connectivity: IEEE 802.3ab 1000BASE-TX, IEEE 802.3z 1000BASE-SX
     Dimensions: 120.7 x 88.9x 25.4 mm / 0.3 kg

TECHNICAL INFORMATION :
- PRODUCT TYPE : STORAGE CONTROLLER (RAID) - LOW PROFILE
- HOST INTERFACE: PCI EXPRESS X8
- DATA TRANSFER RATE: 300MBPS
- RAID LEVELS: 0/1/10
- DRIVE SUPPORT: 32 X LOGICAL
- PLATFORM SUPPORT: PC
PORTS:
- 1 X SFF-8484 - SERIAL ATTACHED SCSI EXTERNAL
- 1 X SFF-8484 - SERIAL ATTACHED SCSI INTERNAL
FORM FACTOR:
- LOW-PROFILE PLUG-IN CARD
- HALF-HEIGHT PLUG-IN CARD

The HP 64-bit/133-MHz Single Channel Ultra320 SCSI host bus adapter (HBA) provides customers with the flexibility and speed they have come to expect from HP . The 64-bit/133-MHz Single Channel Ultra320 SCSI HBA is ideal for HP tape products and larger non-RAID storage applications. This adapter supports Ultra320 SCSI Wide Ultra3 SCSI and Wide Ultra2 SCSI protocols. It is the primary building block for non-RAID SCSI storage solutions that provide the maximum of 320 MB/second bandwidth twice the speed of our current SCSI adapters.
Specifications:
Category : Proliant Controller
Sub-Category : SCSI PCI-X
Generation : G2 HBA
Product Type : SCSI Controller
Bus Type : PCI-X
Enclosure : Internal
SCSI Interface : Wide Ultra2 SCSI, Ultra320 SCSI
Data Transfer Rate : 320MB/s
Devices Supported : 14

- Complies with IEEE 802.3ab and IEEE 802.3z
- Provides switch configuration of Force /Auto transfer mode for FX port.
- Extends fiber distance up to 0.5km

The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs.

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.
- Extends fiber distance up to 20－60km

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK’s 19’’ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs.

Complies with 802.3u 10 / 100Base-TX and 100Base-FX standards
LFP (Link Fault Pass Through) and FEF (Far End Fault) functions reduce losses caused by link interruption when necessary
Allows configuration of the switch in the alternate and simultaneous bidirectional link modes of the FX port
Extension of the distance by optical fiber: up to 2 km
Limited lifetime warranty
Technical support provided by expert French-speaking advisers on TP-LINK products, reachable by phone or email