Category: Category 6 right
Length: 1m
Shield: F / UTP
Green color

Network cable - F / UTP - Category 6 - LSOH - Copper - ANSI / EIA / TIA 568 & ISO / IEC 11801 - 250 MHz - Snagless - 1m - Green

Category: Category 6 right
Length: 1m
Shield: F / UTP
Yellow color

Network cable - F / UTP - Category 6 - LSOH - Copper - ANSI / EIA / TIA 568 & ISO / IEC 11801 - 250 MHz - Snagless - 1m - Yellow

CORD PATCH RJ45 UTP CAT6 5m GRAY
Category: CAT. 6
Frequency: 250 MHz
Impedance: 100 ohms
Conductor: copper
Wiring standard: ANSI / TIA 568C.2 - ISO / IEC 11801
Sheath: PVC
Packaging: individual sachet
Storage and use temperatures: -20 ° to + 60 ° C

Characteristics :
- Category: CAT. 6
- Frequency: 250 MHz
- Impedance: 100 ohms
- Conductor: copper
- Shielding: general with aluminum foil
- Wiring standard: ANSI / TIA 568C.2 - ISO 11801
- Sheath: PVC
- Packaging: individual sachet
- Storage and use temperatures: -20 ° to + 60 ° C

1m Cat6 FTP. Cable length: 1 m
Standard cable: Cat6
Cable shield: F / UTP (FTP)
Connector 1: RJ-45
Connector 2: RJ-45
Connector Gender: Male / Male
Plating connector contacts: Gold
Cable color: GRAY

5m Cat6 FTP. Cable length: 5 m
Standard cable: Cat6
Cable shield: UTP
Connector 1: RJ-45
Connector 2: RJ-45
Cable color: GRAY

CABLE MULTI-STRANDED CAT 6 F / UTP Alu / Copper
CABLE BUDGET
CHARACTERISTICS :
- Category: CAT. 6
- Frequency: 250 MHz
- Impedance: 100 ohm
- Conductor: copper-coated aluminum
- AWG: 26/7
- Shielding: general with aluminum foil
- Outer sheath diameter: 6.0 mm
- Sheath: PVC

- Complies with IEEE 802.3ab and IEEE 802.3z
- Provides switch configuration of Force /Auto transfer mode for FX port.
- Extends fiber distance up to 0.5km

The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs.

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.
- Extends fiber distance up to 20－60km

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK’s 19’’ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs.

Complies with 802.3u 10 / 100Base-TX and 100Base-FX standards
LFP (Link Fault Pass Through) and FEF (Far End Fault) functions reduce losses caused by link interruption when necessary
Allows configuration of the switch in the alternate and simultaneous bidirectional link modes of the FX port
Extension of the distance by optical fiber: up to 2 km
Limited lifetime warranty
Technical support provided by expert French-speaking advisers on TP-LINK products, reachable by phone or email

TG-3468 10/100/1000Mbps Gigabit PCIe Network Adapter is a highly integrated and cost-effective 32-bit Gigabit PCIe Ethernet Adapter which is fully compliant with IEEE 802.3, IEEE 802.3u and IEEE 802.3ab specifications.

The PCIe Gigabit Network Adapter TG-3468 is a high performance adapter designed for the high-speed PCI Express Bus Architecture. Designed to support 10/100/1000Mbps network speed Auto-Negotiation, 802.3x flow control and Wake-on-LAN technology. TG-3468 Gigabit PCIe Network Adapter is a highly integrated and cost-effective Gigabit Ethernet Adapter which is a good selection to upgrade your network.
- Wake-on-LAN supporting
- Auto-Negotiation and Auto MDI/MDIX
- Supports IEEE802.3x Flow Control for Full-duplex Mode and backpressure for Half-duplex Mode
- Supports IEEE 802.1p Layer 2 Priority Encoding and IEEE802.1q VLAN tagging

Description du produit
The HP NC365T 4-port Ethernet Server Adapter is a four lane (x4) PCI Express (PCIe) high performing single-chip, low-power quad port adapter that offers the highest port density among all ProLiant Networking Options.

The NC365T is PCIe Gen 2.0 compliant adapter that supports TCP checksum and segmentation, Large Send and Receive offload capability, Message Signal Interrupt Extension (MSI-X), IEEE 1588, Receive Side Scaling (RSS), VLAN tagging, 9.5KB jumbo frames and IPv6. The NC365T ships with support for an advanced server virtualization feature called Virtual Machine Data queue (VMDq), which improves I/O performance.