Advantages of the product:
Symmetrical DIN rail mounting
Supplied with insulating back plate and transparent front protective covers
Main Features :
Monoblock modular distributors
"Standard" distribution
Connection with or without Starfix tips
Resistance to glowing wire according to EN 60695-2-11: 960 ° C on the supports of active parts
Fixing on symmetrical rail or on plate by 2 screws
Supplied with insulating back plate and transparent front protective covers
Accepts Cab 3 marking on each bar
Possibility of adding an IP 2X terminal block to increase the number of earth or neutral feeders (except ref. 048 77)
Product Features :
Terminal four-pole
Equipped with 4 bars
Imax: 40 A
Number of connections per rigid bar: 11 x 1.5 to 4 // 2 x 6 to 16 mm²
Number of connections per flexible bar: 11 x 0.75 to 4 // 2 x 4 to 10 mm²
Peak DC: 20 kA
Icw: 3 kA
Number of modules: 6

Characteristics of the Legrand protected arrester:
For 230/400 V ~ networks, frequency 50/60 Hz
Protected monobloc, paintable - SP Type 2, Imax: 12 kA
Bipolar
Protection: Integrated (Icc less than or equal to 4.5 kA)
Number of modules: 2
Complies with standards NF EN 61643-11 and IEC 61643-1

Product details
Legrand - 90DEG flat angle for Mosaic direct clipping chute 50x105mm - white
Improved aesthetics (cut overlap)
90 degree flat angle
Respect of the protection index.

Mosaic program trunking

* Amplifier Probe Tone Generator
● The Amplifier Probe is designed to identify and traces wires or cables within a group without damaging the insulation.
● Works with any Tone Generator to identify wires.
● Volume control for increased sensitivity and adjustable to suit work environment.
● Recessed ON/OFF button prevents battery drain.
● Power supply is in any 9V battery with a life of approximately 100 hours.
● A plug receptacle is provided for head set or head phone.
SPECIFICATIONS
Brand : Kuwes
Type : Cable Tracer
Model : KS- 470
Port Type : RJ11/ Red & Black Wire Clip
Size : 230 x 55 x 24 mm (probe)
64 x 58 x 35 mm (toner)

CABLE STORAGE SHEATH

This optical drawer is equipped with:
12 SC multimode duplex bulkhead crossings.
24 multimode SC pigtails OM2.
2 splicing cassettes.
• The Platinum Networks optical panel is fitted with a sliding drawer.
• Two clips allow its closure.
• The panel is fitted as standard with 12 multimode duplex SC optical crossings.
• Several cable entries are available at the rear of the panel.
• A management kit is provided for the organization of the optical jumpers as well as a cable gland.
• A set of fixing lugs is included for the disbursement of the panel.
• The finish is perfect in satin black.
• Technical specifications :
• 1.2mm thick steel
• Satin black powder paint
• RoHS compliant

Specification:

Interface Connections: (2) RJ45 Female Connectors
ESD/EMP Protection: Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/μs
DC Spark-Over Voltage: 90V @ 100V/s
Maximum Impulse Spark-over Voltage: 700V @ 1kV/μs
Discharge Current: 10kA+
Maximum Insulation Resistance: 1G ohm @ 50V
Maximum Capacitance: 1.0 pF @ 1 MHz
Data Line Protection: RJ45 10/100/1000 Ethernet
IEEE 802.3af PoE Support: Yes
Shock and Vibration Certification: ETSI300-019-1.4 Standard

Compatible with a large number of multifunction USB printers
Compatible with GDI printers
Supports Internet Printing Protocol (IPP) for remote printing
Secured access
Compatible with many operating systems
Simplified configuration with the D-Link Click’n Connect wizard

The DPR-1020 multifunction USB print server is surprisingly compact. It is ideal for private, professional or school use. With a USB printing port, it allows you to add a conventional or multifunction printer on the network.

Synchronization of operations

Secure access and support for multiple operating systems

Remote printing

Easy installation

Octopus cable for KVM ATEN
Connector to CPU: VGA + USB
Connector to KVM: SPHD-15M
Length 5.00m

19" Fixed Shelf
1U, 900 mm Depth, Gray

Maximum static load of 50 kg
Antistatic powder coating
1 mm steel thickness

Secure your 900 micron fibers!

Box that allows you to create an interface between the arrival of your multi fiber and your active elements, without passing for an optical drawer, to avoid handling the 900 micron fibers, fragile and expensive.
The connection is made by means of optical jumpers which are less fragile. this product does not imply the use of a 19 '' rack or cabinet.
- 2 entries for cable gland
- Box equipped with connectors
- Direct connection of your trunk by cable gland
- Wall mounting (screws not supplied)
- Box equipped with 4 double SC bushings
- width: 150 mm
- Depth: 200 mm
- Thickness: 50 mm

double springs: double springs ensure sufficient elasticity and longevity
Sharp cable cutter: built-in sharp and thick cable cutter, cut coaxial cable easily and make sure the cutting port is flat and burr-free
Convenient: easy to use and adjust, perfect for customizing perfect length coaxial cables
Material: PVC, steel; Size: 22.5cm
Coax cable Crimping tool: suitable for coaxial cable RG59 / RG6, as well as coaxial F, BNC and RCA connectors