Characteristics :
- Category: CAT. 6
- Frequency: 250 MHz
- Impedance: 100 ohms
- Conductor: copper-coated aluminum (CCA)
- Shielding: general with aluminum foil
- Wiring standard: compatible with ANSI / TIA 568C.2 - ISO 11801
- Sheath: PVC
- Packaging: individual sachet
- Storage and use temperatures: -20 ° to + 60 ° C
- Not suitable for PoE applications

Characteristics :
- Category: CAT. 6
- Frequency: 250 MHz
- Impedance: 100 ohms
- Conductor: copper-coated aluminum (CCA)
- Shielding: general with aluminum foil
- Wiring standard: compatible with ANSI / TIA 568C.2 - ISO 11801
- Sheath: PVC
- Packaging: individual sachet
- Storage and use temperatures: -20 ° to + 60 ° C

Category: Category 6 right
Length: 1m
Shield: F / UTP
Green color

Network cable - F / UTP - Category 6 - LSOH - Copper - ANSI / EIA / TIA 568 & ISO / IEC 11801 - 250 MHz - Snagless - 1m - Green

Category: Category 6 right
Length: 1m
Shield: F / UTP
Yellow color

Network cable - F / UTP - Category 6 - LSOH - Copper - ANSI / EIA / TIA 568 & ISO / IEC 11801 - 250 MHz - Snagless - 1m - Yellow

CORD PATCH RJ45 UTP CAT6 5m GRAY
Category: CAT. 6
Frequency: 250 MHz
Impedance: 100 ohms
Conductor: copper
Wiring standard: ANSI / TIA 568C.2 - ISO / IEC 11801
Sheath: PVC
Packaging: individual sachet
Storage and use temperatures: -20 ° to + 60 ° C

Characteristics :
- Category: CAT. 6
- Frequency: 250 MHz
- Impedance: 100 ohms
- Conductor: copper
- Shielding: general with aluminum foil
- Wiring standard: ANSI / TIA 568C.2 - ISO 11801
- Sheath: PVC
- Packaging: individual sachet
- Storage and use temperatures: -20 ° to + 60 ° C

5m Cat6 FTP. Cable length: 5 m
Standard cable: Cat6
Cable shield: UTP
Connector 1: RJ-45
Connector 2: RJ-45
Cable color: GRAY

CABLE MULTI-STRANDED CAT 6 F / UTP Alu / Copper
CABLE BUDGET
CHARACTERISTICS :
- Category: CAT. 6
- Frequency: 250 MHz
- Impedance: 100 ohm
- Conductor: copper-coated aluminum
- AWG: 26/7
- Shielding: general with aluminum foil
- Outer sheath diameter: 6.0 mm
- Sheath: PVC

- Complies with IEEE 802.3ab and IEEE 802.3z
- Provides switch configuration of Force /Auto transfer mode for FX port.
- Extends fiber distance up to 0.5km

The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs.

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.
- Extends fiber distance up to 20－60km

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK’s 19’’ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs.

Device Type     Switch - 26 ports - L3 - Managed
Enclosure Type : Desktop 1U
Interfaces : Gigabit Ethernet
Ports : 26 x 10/100/1000 + 2 x combo Gigabit SFP
MAC Address Table Size : 8K entries
Routing Protocol : Static IPv4 routing
Remote Management Protocol : SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, SSH, CLI
Compliant Standards     IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Power : AC 120/230 V ( 50/60 Hz )

Management characteristics
Switch Type: Managed
Switch bank: L2 / L3
Quality of service (QoS): Yes
Multicasting support: Yes
Web-based management: Yes
Traffic classification: Yes
Traffic management: Yes
ARP Inspection: Yes
Reset button: Yes
Quantity of basic RJ-45 Ethernet switching ports: 24
HOL function against overloading of file headers: Yes
Flow control assistance: Yes
Port mirroring: Yes
Link aggregation: Yes
Broadcast storm control: Yes
Flow limitation: Yes
IP routing: Yes
IGMP filtering: Yes
Spanning Tree Protocols (STP): Yes
10G support: No
Active link detection: Yes
Giant frames: 9216
Access control list (ACL): Yes
SSH / SSL support: Yes
Ethernet connection, supporting power via this port (PoE): No

see + below.