Wireless Bluetooth speaker with carry strap Bluetooth 4.1 2x3W RMS 3.5mm AUX IN USB cable for charging included AUX cable included Built-in 400mAh battery (3hours playback @ 80% volume)
Advantages of the product: Symmetrical DIN rail mounting Supplied with insulating back plate and transparent front protective covers Main Features : Monoblock modular distributors "Standard" distribution Connection with or without Starfix tips Resistance to glowing wire according to EN 60695-2-11: 960 ° C on the supports of active parts Fixing on symmetrical rail or on plate by 2 screws Supplied with insulating back plate and transparent front protective covers Accepts Cab 3 marking on each bar Possibility of adding an IP 2X terminal block to increase the number of earth or neutral feeders (except ref. 048 77) Product Features : Terminal four-pole Equipped with 4 bars Imax: 40 A Number of connections per rigid bar: 11 x 1.5 to 4 // 2 x 6 to 16 mm² Number of connections per flexible bar: 11 x 0.75 to 4 // 2 x 4 to 10 mm² Peak DC: 20 kA Icw: 3 kA Number of modules: 6
Interface Connections: (2) RJ45 Female Connectors ESD/EMP Protection: Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/μs DC Spark-Over Voltage: 90V @ 100V/s Maximum Impulse Spark-over Voltage: 700V @ 1kV/μs Discharge Current: 10kA+ Maximum Insulation Resistance: 1G ohm @ 50V Maximum Capacitance: 1.0 pF @ 1 MHz Data Line Protection: RJ45 10/100/1000 Ethernet IEEE 802.3af PoE Support: Yes Shock and Vibration Certification: ETSI300-019-1.4 Standard
CORD DUPLEX OS2 9/125 LSOH ST / SC- 1 m - Complies with ITU-T G-652.D and ANSI / TIA / EIA 492 standards - LS0H sheath (zero halogen) - Low insertion loss: less than or equal to 0.2 dB - High return loss: greater than or equal to 50 dB - Outside diameter: 3 mm - Ceramic ferrule connector - Duplex assembly clip (except ST side) - Individually tested with test sheet - Delivered in individual sachet
