- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.
- Extends fiber distance up to 20－60km

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK’s 19’’ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs.

Device Type     Switch - 26 ports - L3 - Managed
Enclosure Type : Desktop 1U
Interfaces : Gigabit Ethernet
Ports : 26 x 10/100/1000 + 2 x combo Gigabit SFP
MAC Address Table Size : 8K entries
Routing Protocol : Static IPv4 routing
Remote Management Protocol : SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, SSH, CLI
Compliant Standards     IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Power : AC 120/230 V ( 50/60 Hz )

Management characteristics
Switch Type: Managed
Switch bank: L2 / L3
Quality of service (QoS): Yes
Multicasting support: Yes
Web-based management: Yes
Traffic classification: Yes
Traffic management: Yes
ARP Inspection: Yes
Reset button: Yes
Quantity of basic RJ-45 Ethernet switching ports: 24
HOL function against overloading of file headers: Yes
Flow control assistance: Yes
Port mirroring: Yes
Link aggregation: Yes
Broadcast storm control: Yes
Flow limitation: Yes
IP routing: Yes
IGMP filtering: Yes
Spanning Tree Protocols (STP): Yes
10G support: No
Active link detection: Yes
Giant frames: 9216
Access control list (ACL): Yes
SSH / SSL support: Yes
Ethernet connection, supporting power via this port (PoE): No

see + below.

Management characteristics
Switch Type: Unmanaged
Switch bank: L2
Quality of service (QoS): Yes
Quantity of basic RJ-45 Ethernet switching ports: 24
Basic RJ-45 Ethernet port type: Fast Ethernet (10/100)
Quantity of SFP Combo Ports: 2
Ethernet copper cabling technology: 10BASE-T, 100BASE-TX
Fast Ethernet (copper) Number of ports: 24
Fiber Channel ports: 2
Network standards: IEEE 802.1p, IEEE 802.3, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Full duplex: Yes
HOL function against overloading of file headers: Yes
Flow control assistance: Yes
Auto MDI / MDI-X: Yes
10G support: No
Switching capacity: 8.8 Gbit / s
Throughput: 6.5 Mpps
Number of lines: 4
Jumbo Frames Support: Yes
Giant frames: 9216
Loop protection: Yes
Mounting grid: Yes
Ethernet connection, supporting power via this port (PoE): No

Switch Type: Unmanaged
Switch bank: L2
Quality of service (QoS): Yes
Quantity of basic RJ-45 Ethernet switching ports: 8
Basic RJ-45 Ethernet port type: Fast Ethernet (10/100)
Ethernet copper cabling technology: 100BASE-TX, 10BASE-T
Fast Ethernet (copper) Number of ports: 8
Network standards: IEEE 802.1p, IEEE 802.3, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x

Full duplex: Yes
HOL function against overloading of file headers: Yes
Flow control assistance: Yes
Auto MDI / MDI-X: Yes
10G support: No
Switching capacity: 1.6 Gbit / s
Throughput: 1.4 Mpps
Number of lines: 4
Jumbo Frames Support: Yes
Certification: UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A, FCC Class B
Ethernet connection, supporting power via this port (PoE): No

see more below !!

Main characteristics :
11 inch metal enclosure (1U / 19 "rack mountable with adapters - not included)
VLAN support for traffic segmentation
VLAN AutoSurveillance function for easy integration into IP surveillance systems
Loop detection and control of mass sending of messages to avoid network interruptions
QoS (quality of service) and bandwidth control to guarantee smooth operation
Cable diagnostic function for easy troubleshooting of wiring problems
Switch bank: L2
Basic RJ-45 Ethernet port type: Gigabit Ethernet (10/100/1000)
Network standards: IEEE 802.3ab, IEEE 802.3aq, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
MAC directory: 8000 entries
Switching capacity: 16 Gbit / s
Throughput: 11.9 Mpps
Black color
Security: UL / cUL, CE LVD

Linksys Gi switch 16-port desktop template (LGS116). Switch type: Unmanaged. Basic RJ-45 Ethernet port type: Gigabit Ethernet (10/100/1000)
Quantity of basic RJ-45 Ethernet switching ports: 16. MAC directory: 8000 entries
Switching capacity: 32 Gbit / s. Network standards: IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x. Wall mounting

Technical characteristics :
     8 ports 10 / 100Base-T
     Automatic speed detection on each port
     Automatic full-duplex / half-duplex detection
     Automatic crossover detection (auto MDI / MDI-X) on each port
     Self-learning network configuration
     Individual activity LEDs for each port
     Plug'n play installation
  Non-blocking architecture: full simultaneous speed on all ports
Silent and fanless, it is suitable for any type of environment
Quality of service queues for organizing traffic by priority
Robust model with metal housing, ideal for high-risk industrial sites
Diagnostic function to detect faulty network cables

Technical characteristics :
     8 ports 10 / 100Base-T
     Automatic speed detection on each port
     Automatic full-duplex / half-duplex detection
     Automatic crossover detection (auto MDI / MDI-X) on each port
     Self-learning network configuration
     Individual activity LEDs for each port
     Plug'n play installation

MikroTik RBSXTsqG-5acD 16dBi 5GHz antenna, Dual Chain 802.11ac wireless, 716MHz CPU, 256MB RAM, 1 x Gigabit LAN, POE, PSU, pole mount, RouterOS L3
Specifications Sheet
Wireless Standards
802.11a , 802.11n , 802.11ac
Ethernet Speed
1Gbps
Bands
5.0GHz
Integrated PoE

Straight male plug 22 CEE, series 4732
CEE C14 power connector for use with CEE C13 female connectors.
CEE 22 male plug straight, designed to receive cables 3 x 1 mm2 max.
Screw terminal connection.
Type E connector.
standards
UL, CSA and VDE.
IEC connector type: C14
Mounting type: Cable mounting
Gender: Male
Current: 10A
Body orientation: Straight
Connection type: Screw
Voltage: 250 V AC