Product information

Product name: Cover / faceplate for 273046, Type: Cover

Packaging: Unit

Technical characteristics

Type: Wheel cover

Short CAT 6 STP RJ45 core header

Female RJ45 sockets to be mounted on rigid single strand cable

Short base recommended for wall outlet mounting

Category 6 certified (250 Mhz per pair) recommended for GigaBit 1000Mhz network

Base for panels and faceplates, easy to place thanks to its small footprint

shielded STP (Shielded Twisted Pair)

Denudant auto contact (CaD) by a toggle clip

Color code identification EIa568a & EIa568B to simplify wiring

PLASTRON SUPPORT 45 X 45

Trim / cover for 45 x 45 mm faceplate

- to be used with a surface-mounted wall box Ref. 272020

- mounting of the faceplate directly on the cover

- for 45 x 45 mm faceplate

- bezel to be screwed onto the protruding housing (2 screws)

- supplied with 2 label holders

main Features

Patch panel to be mounted in a 19-inch wall box or cabinet

Female RJ45 connector category 6 STP (shielded)

CAT6 certification up to 250MHz per pair ideal for GigaBit 1000MHz networks

Height 1U (1.75 '' or 4.44cm)

With 24 standard EIA / TIA568A and EIA / TIA568B ports

Cable retention by metal clamps

Compatibility: AWG22 to AWG26 stranded or single stranded cable

main Features

Connection type Cord Signal Network

Connector type A RJ-45

Connector type B RJ-45

Gender connector A Male

Gender connector B Male

Category cable used Cat. 6

Category Cat. 6 F / UTP shielding

Length (m) 10

Blue color

Secondary characteristics LSOH Non Snagless Non Crossed Non Conductive Copper Wiring standard ANSI / EIA / TIA 568 & ISO / IEC 11801

main Features

Connection type Cord Signal Network

Connector type A RJ-45 Connector type B RJ-45

Gender connector A Male

Gender connector B Male

Category cable used Cat. 6

Category Cat. 6

F / UTP shield Length (m) 10

Red color

Secondary characteristics LSOH Non Snagless Non Crossed Non Conductive Copper Wiring standard ANSI / EIA / TIA 568 & ISO / IEC 11801

Connection cable Cat. 5th, F / UTP, copper, PoE, blue, 0.7m

Screened connection cable with particularly narrow anti-twist protection

- RJ45 plug to RJ45 plug - twisted pair, F / UTP, 4 x 2 x AWG 26

- particularly narrow anti-bending protection (ideal for high packing density on the switch)

- frequency: 100 MHz - impedance: 100 ohms - conductor : copper Sc

- RJ-45 CAT.6 S-FTP modular jack

- shielded with anti-interference metal shield, the R-J45 head consists of 2 components, used for CAT.6 S-FTP cable.

- 100 pieces / box.

24 PORTS CAT6 FTP DINTEK BREWING PANEL
-Product Code : 1402-04033
-Patch panel 24-port Dintek, CAT.6 19 inch Fully Shielded, 24 Ports, 1U.
-Cat.6 19 inch 110/Krone type fully shielded patch panel 24 ports, 1U size Component level.
Features
-High performance, exceeds ANSI/TIA-568-C.2 Category 6 Hardware transmission performance.
-100% shielded for complete EMI/RFI protection.
-19 inch 24port patch panel, 1U size.
-110 and Krone dual type IDC termination.
-Accepts 22-26AWG, Stranded or solid wire.
-Wiring: T568A/B.
Electrical
-Insulation resistance: 500 Mega ohms min.
-Dielectric with standing voltage: 1,000 Volts, RMS, 60Hz, 1min.
-Contact resistance: 20 milli ohms max.

Key Specifications / Special Features:

Cat.6 fully shielded patch panel

19 inch 110 / krone 24 ports,

Responds to all 6-channel cat links.

19 "24port patch panel, size 1u.

Double 110 and krone idc termination.

Accepts 22-26awg, stranded or solid wire.

Wiring: t568a / b.

Housing: impact resistant, flame retardant.

Made of ... Phosphor bronze alloy.

Insulation resistance: 10 mega ohms min.

Permanent voltage dielectric: 1000 volts. , efficient, 60hz, 1min.

Contact resistance: 20 milliohms max.

Nominal current: 1.5 amps.

Total coupling force: 800 grams for an 8 wire.

Retention: 30 lbs min between the jack.

Insertion / extraction time: 750 cycles min.