The QL-800 is a USB-connectable label printer for creating custom labels using the free P-touch Editor software. It uses DK rolls in continuous version or in pre-cut label format.

Main features

Prints up to 62mm wide 148mm/sec print speed

Prints labels using P-touch Editor design software Black and red print

Tape sizes: DK 12 / 17 / 24 / 29 / 38 / 58 / 62mm

Included: 1 roll DK-11201, 1 roll DK-22251, power cable and USB cable

Description Product: UPS Brand: VERTIV LIEBERT Operating voltage: Mono/Mono VA power: 6000 Technology: On-Line Model: GXT Format: Tower and Rack Universe: Networks & Servers VA power: From 3201 to 6000 Input voltage: 230 VAC Output voltage: 200/208/220/230/240 VAC Output power capacity: 6000 W / 6 kVA

• 4 or 8 ports
• 2 10/100 Mbps network ports
• Comprehensive codec support, caller ID, flexible dial plans and security protection
• Advanced security protection with SRTP
• Designed and tested for full interoperability with leading IP-PBXs, soft-switches and SIP-based environments
• PSTN Failover on power failure

Energy management
Power supply input frequency: 40 - 70
Power
Power supply input frequency: 40 - 70
Characteristics
UPS Topology: Double-conversion (Online)
output power capacity: 6000
Output power: 4800
Waveform: Sine
Input voltage voltage (min): 176
Input voltage voltage (max): 280
voltage output voltage (min): 200
Voltage output voltage (max): 240
output frequency: 50/60
Efficiency: 92
EMI / RFI noise filter: Yes
Noise level: 55
Surge protection: Yes
Automatic restart: Yes
Connectivity
AC output types: C13 couple, C19 couple
Male plug: Terminal
Number of outlets: 8
Quantity of USB 2.0 Ports: 1
Drums
Battery technology: Sealed Lead Acid (VRLA)
Battery capacity: 5
Battery voltage: 12
Number of batteries supported: 20
Typical backup time at full load: 6
Typical backup time at half load: 17
Battery recharge time Approximate : 3
Hot swappable battery: Yes

Connectivity
Connectivity technology: Wired
Internal: Yes
Host interface Descriptions of the products host interface Ethernet
Interface: Ethernet
Bandwidth
Data transfer rate (maximum): 100 Mbit / s
Network
Ethernet / LAN: Yes
Wiring technology: Type of cable technology performance; including the fiber or cable type: 10 / 100BaseT (X)
Energy management
Input voltage: 7 - 12 V
Power consumption: Amount of power used by this model; expressed in watts: 3.6 W

Features
- 10 Single-Touch Speed Dial Memories
- 16-Digit & 16-Character LCD Display with 5-Level Contrast Control
- 16 Ring Melodies Selectable
- 76 Caller ID Memories
- 80 Phone Book Entries, 16 Characters for Each Name, 20 Digits for Each Number
- Automatic Call Timer
- Battery-Free Solution
- Call Back from Caller ID Memory
- Cellular Phone RFI Noise Immunity
- Business Grade High-Quality Speakerphone
- Data Port : RJ11 Jack
- Flash Time (100/200/300/400/600/900ms) Adjustable
- FSK/DTMF CLIP
- Hold with Mute, Music & Extension Release
- Intelligent Auto Busy Redial
- Last 16 Dialed Numbers Review and Redial
- Message Waiting and Incoming Call Indication
- On-Hook Delay 1.2 Seconds for PBX to Prevent Ring Back
- Speakerphone and LCD Display Work well with Line Power Alone, Without Battery
- Speed Dial Memories & Phone Book Entries will be Saved During Power Failure

General
Type of device: Inverter - external
 
Power Device
UPS - Uninterrupted Power Supply: On-line
Input voltage: AC 230 V
Frequency supplied: 50/60 Hz
Frequency required: 40 - 70 Hz
Input Connectors: 1
Output voltage: AC 230 V 50/60 Hz
Power supply capacity: 6 kW / 6000 VA
Output waveform: Sinusoidal
Index of energy consumption on break: 600 Joules
 
Drums
Technology: Lead Acid
Charge time: 3 hours
Features: Maintenance-free, sealed, leak-proof
 
networks
Remote Management Interface: RS-232, USB
 
Various
Cables Included: USB Cable - External
Functions: Casters, audible signal, LCD display, Eco-Mode, double conversion
Compliance Standards: IEC 62040-1-1, IEC 62040-1-2