- Complies with IEEE 802.3ab and IEEE 802.3z
- Provides switch configuration of Force /Auto transfer mode for FX port.
- Extends fiber distance up to 0.5km

The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs.

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.
- Extends fiber distance up to 20－60km

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK’s 19’’ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs.

Complies with 802.3u 10 / 100Base-TX and 100Base-FX standards
LFP (Link Fault Pass Through) and FEF (Far End Fault) functions reduce losses caused by link interruption when necessary
Allows configuration of the switch in the alternate and simultaneous bidirectional link modes of the FX port
Extension of the distance by optical fiber: up to 2 km
Limited lifetime warranty
Technical support provided by expert French-speaking advisers on TP-LINK products, reachable by phone or email

Features
- Adopts AlignTM technology, with transmit speed up to 150Mbps;
- Provides PCI Express connector having a wider compatibility with any standard PCI Express slot;
- Supports QSS function, complying with WPS for worry free wireless security;
- Supports 64/128/152-bit WEP, WPA /WPA2/WPA-PSK/WPA2-PSK(TKIP/AES), supports IEEE 802.1X;
- Supports roaming technology, guaranteeing uninterrupted wireless connection;
- Supports Ad-Hoc/Infrastructure modes;
- Seamlessly compatible with 802.11n/b/g devices;
- Supports Windows 2000, Windows XP 32/64bit, Vista 32/64bit.

- Up to 150Mbps wireless transmission rate
- Provides PCI Express interface
- Advanced secure connection with WPA/WPA2 encryption
- Bundled utility enables easy management

TG-3468 10/100/1000Mbps Gigabit PCIe Network Adapter is a highly integrated and cost-effective 32-bit Gigabit PCIe Ethernet Adapter which is fully compliant with IEEE 802.3, IEEE 802.3u and IEEE 802.3ab specifications.

The PCIe Gigabit Network Adapter TG-3468 is a high performance adapter designed for the high-speed PCI Express Bus Architecture. Designed to support 10/100/1000Mbps network speed Auto-Negotiation, 802.3x flow control and Wake-on-LAN technology. TG-3468 Gigabit PCIe Network Adapter is a highly integrated and cost-effective Gigabit Ethernet Adapter which is a good selection to upgrade your network.
- Wake-on-LAN supporting
- Auto-Negotiation and Auto MDI/MDIX
- Supports IEEE802.3x Flow Control for Full-duplex Mode and backpressure for Half-duplex Mode
- Supports IEEE 802.1p Layer 2 Priority Encoding and IEEE802.1q VLAN tagging

Description du produit: D-Link AirPlus G DWL-G510 - Adaptateur Réseau
Type de produit: Adaptateur Réseau
Facteur de forme: Carte enfichable
Type d'interface (bus): PCI
Protocole de liaison de données: IEEE 802.11b, IEEE 802.11g
Débit de transfert de données: 54 Mbits / s
Bande de fréquence: 2,4 GHz
Conformité aux normes: IEEE 802.11b, IEEE 802.11g, IEEE 802.1x

Installable in a PC equipped with PCI slots
Product Type: PCI Card Ethernet Network Adapter
Type of facility: Network adapter
Form factor: Plug-in card
Interface type (bus): PCI
Data transfer rate: 1 Gbits / s
Wiring Type: 10Base-T Ethernet, 100Base-TX Ethernet, 1,000Base-T Ethernet
Data link protocol: Ethernet, Fast Ethernet, Gigabit Ethernet
Compliance with standards: IEEE 802.1Q, IEEE 802.3x

Description du produit
The HP NC365T 4-port Ethernet Server Adapter is a four lane (x4) PCI Express (PCIe) high performing single-chip, low-power quad port adapter that offers the highest port density among all ProLiant Networking Options.

The NC365T is PCIe Gen 2.0 compliant adapter that supports TCP checksum and segmentation, Large Send and Receive offload capability, Message Signal Interrupt Extension (MSI-X), IEEE 1588, Receive Side Scaling (RSS), VLAN tagging, 9.5KB jumbo frames and IPv6. The NC365T ships with support for an advanced server virtualization feature called Virtual Machine Data queue (VMDq), which improves I/O performance.

Device Type     Switch - 26 ports - L3 - Managed
Enclosure Type : Desktop 1U
Interfaces : Gigabit Ethernet
Ports : 26 x 10/100/1000 + 2 x combo Gigabit SFP
MAC Address Table Size : 8K entries
Routing Protocol : Static IPv4 routing
Remote Management Protocol : SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, SSH, CLI
Compliant Standards     IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Power : AC 120/230 V ( 50/60 Hz )

Management characteristics
Switch Type: Managed
Switch bank: L2
Quality of service (QoS): Yes
Multicasting support: Yes
Web-based management: Yes
System event log: Yes
Reset button: Yes
Quantity of basic RJ-45 Ethernet switching ports: 24
Port type Ethernet RJ-45 switching base Gigabit Ethernet (10/100/1000)
Quantity of SFP Combo Ports: 2
Quantity of USB 2.0 Ports: 1
HOL function against overloading of file headers: Yes
Flow control assistance: Yes
Port mirroring: Yes
Link aggregation: Yes
Broadcast storm control: Yes
Flow limitation: Yes
DHCP client: Yes
IGMP filtering: Yes
10G support: No
VLAN support: Yes
Port-based VLAN: Yes
Switching capacity: 52 Gbit / s
Throughput: 38.69 Mpps
Rack mounting kit: Yes

Management characteristics
Switch Type: Managed
Switch bank: L2 / L3
Quality of service (QoS): Yes
Multicasting support: Yes
Web-based management: Yes
Traffic classification: Yes
Traffic management: Yes
ARP Inspection: Yes
Reset button: Yes
Quantity of basic RJ-45 Ethernet switching ports: 24
HOL function against overloading of file headers: Yes
Flow control assistance: Yes
Port mirroring: Yes
Link aggregation: Yes
Broadcast storm control: Yes
Flow limitation: Yes
IP routing: Yes
IGMP filtering: Yes
Spanning Tree Protocols (STP): Yes
10G support: No
Active link detection: Yes
Giant frames: 9216
Access control list (ACL): Yes
SSH / SSL support: Yes
Ethernet connection, supporting power via this port (PoE): No

see + below.

Management characteristics
Switch Type: Unmanaged
Switch bank: L2
Quality of service (QoS): Yes
Quantity of basic RJ-45 Ethernet switching ports: 24
Basic RJ-45 Ethernet port type: Fast Ethernet (10/100)
Quantity of SFP Combo Ports: 2
Ethernet copper cabling technology: 10BASE-T, 100BASE-TX
Fast Ethernet (copper) Number of ports: 24
Fiber Channel ports: 2
Network standards: IEEE 802.1p, IEEE 802.3, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Full duplex: Yes
HOL function against overloading of file headers: Yes
Flow control assistance: Yes
Auto MDI / MDI-X: Yes
10G support: No
Switching capacity: 8.8 Gbit / s
Throughput: 6.5 Mpps
Number of lines: 4
Jumbo Frames Support: Yes
Giant frames: 9216
Loop protection: Yes
Mounting grid: Yes
Ethernet connection, supporting power via this port (PoE): No