An economical way to convert a 9-pin female port to a 9-pin male port
Easy to use and install
Small footprint

45x22.5 half-faceplate - 1 RJ-45 port
- Format 45 x 22.5 mm
- Protection flap
- To be fitted with base in keystone format
- To be mounted on a chute or 45 mm high box
- Twin assembly of 2 half-faceplates in 45 x 45

Value for money and small size! | The LSZH 2 mm thick optical jumper is ideal for internal use in network cabinets. Its small thickness with a diameter of only 2 millimeters will save a lot of space on high density installations. The 2mm optical jumper is also more economical, but without sacrificing quality, each jumper comes with its test report. | Available in different lengths and with different combinations of connectors | | More product: | Important space saving for high density brewing | More economical | Test report with each garter | | Main features: | | Singlemode fiber duplex cable OS2 9 / 125um

DINTEK 19 "WIREBREAKER WIRE 1U

Physical Characteristics
    Color: Black
    Panel Finish: Textured Paint Coating
    Panel Thickness: 1.6 mm
    Material:  Metal SPCC 1.6t
    Panel Height:  44 mm [1.7 in]
    Duct (Front Mount): 40mm x 40mm
    Panel Width: 482 mm [19.1 in]
    Panel Weight:  450g

Hardware Characteristics
    Industry Standards: EIA/ECA-310-E
    Mounting Options: Front Mount (Front Only)
    Orientation: Horizontal
    Panel Height: 1U & 2U options

MULTIMODE SC / LC GARTER 1m

The Optics® Platinum Networks optical jumpers are made up of two optical fibers of variable length, protected by a sheath, and equipped at each end with an optical connector. In order to solve all the connectivity problems between a device and an optical cabinet (or drawer), the connectors are not always the same at each end.

Multimode fiber optic equipment and components are less expensive than their single-mode counterparts, so OM3 50/125 multimode fiber optic jumpers (or optical patch cords) are widely used in systems where connections need to be made inexpensively.

- Length: 1m

- Mode: OM3 50/125

- Connection: LC / SC

Category CAT 6

Length 3 m

Network cable type Connection cord

Screened Twisted Pair Technology (FTP)

Gender of male straight connector

RJ-45 straight connector type

Gender of left connector Male

The pigtail cord TL-ANT200PT is ideal for connecting an external antenna to an access point or an internal router. it is very easy to implement and requires no tools or adjustments.
Cord compatible with 2.4GHz and 5GHz frequencies used by 802.11a, b, g, n, ac wifi networks
Weather resistant designed for external use
Cord formed of a LMR200 cable with low losses and compatible with the 2.4GHz and 5GHz frequencies of the signals it carries
N male and RP-SMA female connectors suitable for all TP-LINK products with detachable antennas.

This shutter allows to block the space of 1U within your 19 '' racks and boxes.