Advantages of the product: Simple to install Facilitates the association of the male plug to the female plug Main Features : Installs on a power outlet Product Features : Coding Attaches directly to the 2P + T plug of the device intended to be connected to the polarized socket

Product specifications

50 x 105 direct clip-on chute
1 compartment chute
Includes:
1 body
1 flexible cover 45 mm wide
Supplied in 6 units, 2 m long
Accepts all Mosaic devices
50 x 80 and 50 x 105 direct clip Mosaic trunking
IP 40 - IK 07
Complies with standard NF EN 50085-2-1

Technical characteristics of the product
Cover plate
Installation height: 0 mm
Bore diameter (opening): 0 mm
Installation width: 0 mm
Suitable for concealed installation: No
Label holder: No
Suitable for a floor box: No
Adapted to a light channel: Yes
Suitable for integrated installation: No
Ral number (equivalent): 9003
Transparent: No
With protective flap: No
Material quality: Other
Surface finish: Glossy
Protection index (ip): Ip40
Type of fastening: Other
Number of units, horizontal: 1
Number of units, vertical: 1
Number of units: 1
Installation direction: Horizontal
Surface treatment: Untreated
Halogen-free: Yes
White colour
Material: plastic
Number of horizontal modules (modular construction): 4
Impact protection index (ik): Ik07

Technical characteristics of the product:
Cover for trunking / installation column
Protection sheet: Yes
Type of mounting of the upper parts: Global
Material quality: Pvc
Width: 85mm
Ral number: 9003
Surface treatment: Untreated
Halogen-free: No
Color: Pure white
Model: Polished
Material: plastic
Length: 2000 mm

Advantages of the product:
Symmetrical DIN rail mounting
Supplied with insulating back plate and transparent front protective covers
Main Features :
Monoblock modular distributors
"Standard" distribution
Connection with or without Starfix tips
Resistance to glowing wire according to EN 60695-2-11: 960 ° C on the supports of active parts
Fixing on symmetrical rail or on plate by 2 screws
Supplied with insulating back plate and transparent front protective covers
Accepts Cab 3 marking on each bar
Possibility of adding an IP 2X terminal block to increase the number of earth or neutral feeders (except ref. 048 77)
Product Features :
Terminal four-pole
Equipped with 4 bars
Imax: 40 A
Number of connections per rigid bar: 11 x 1.5 to 4 // 2 x 6 to 16 mm²
Number of connections per flexible bar: 11 x 0.75 to 4 // 2 x 4 to 10 mm²
Peak DC: 20 kA
Icw: 3 kA
Number of modules: 6

Characteristics of the Legrand protected arrester:
For 230/400 V ~ networks, frequency 50/60 Hz
Protected monobloc, paintable - SP Type 2, Imax: 12 kA
Bipolar
Protection: Integrated (Icc less than or equal to 4.5 kA)
Number of modules: 2
Complies with standards NF EN 61643-11 and IEC 61643-1

Product details
Legrand - 90DEG flat angle for Mosaic direct clipping chute 50x105mm - white
Improved aesthetics (cut overlap)
90 degree flat angle
Respect of the protection index.

Mosaic program trunking

* Amplifier Probe Tone Generator
● The Amplifier Probe is designed to identify and traces wires or cables within a group without damaging the insulation.
● Works with any Tone Generator to identify wires.
● Volume control for increased sensitivity and adjustable to suit work environment.
● Recessed ON/OFF button prevents battery drain.
● Power supply is in any 9V battery with a life of approximately 100 hours.
● A plug receptacle is provided for head set or head phone.
SPECIFICATIONS
Brand : Kuwes
Type : Cable Tracer
Model : KS- 470
Port Type : RJ11/ Red & Black Wire Clip
Size : 230 x 55 x 24 mm (probe)
64 x 58 x 35 mm (toner)

CABLE STORAGE SHEATH

This optical drawer is equipped with:
12 SC multimode duplex bulkhead crossings.
24 multimode SC pigtails OM2.
2 splicing cassettes.
• The Platinum Networks optical panel is fitted with a sliding drawer.
• Two clips allow its closure.
• The panel is fitted as standard with 12 multimode duplex SC optical crossings.
• Several cable entries are available at the rear of the panel.
• A management kit is provided for the organization of the optical jumpers as well as a cable gland.
• A set of fixing lugs is included for the disbursement of the panel.
• The finish is perfect in satin black.
• Technical specifications :
• 1.2mm thick steel
• Satin black powder paint
• RoHS compliant

Specification:

Interface Connections: (2) RJ45 Female Connectors
ESD/EMP Protection: Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/μs
DC Spark-Over Voltage: 90V @ 100V/s
Maximum Impulse Spark-over Voltage: 700V @ 1kV/μs
Discharge Current: 10kA+
Maximum Insulation Resistance: 1G ohm @ 50V
Maximum Capacitance: 1.0 pF @ 1 MHz
Data Line Protection: RJ45 10/100/1000 Ethernet
IEEE 802.3af PoE Support: Yes
Shock and Vibration Certification: ETSI300-019-1.4 Standard

Compatible with a large number of multifunction USB printers
Compatible with GDI printers
Supports Internet Printing Protocol (IPP) for remote printing
Secured access
Compatible with many operating systems
Simplified configuration with the D-Link Click’n Connect wizard

The DPR-1020 multifunction USB print server is surprisingly compact. It is ideal for private, professional or school use. With a USB printing port, it allows you to add a conventional or multifunction printer on the network.

Synchronization of operations

Secure access and support for multiple operating systems

Remote printing

Easy installation