HP 42U G2 642 1075MM BREWING CABINET WITH LATERAL PANEL

U-size: 42 U

Height: 2006 mm

Depth: 1075 mm

Width: 600 mm

Black color

With black side panel

MULTIMODE SC / LC GARTER 1m

The Optics® Platinum Networks optical jumpers are made up of two optical fibers of variable length, protected by a sheath, and equipped at each end with an optical connector. In order to solve all the connectivity problems between a device and an optical cabinet (or drawer), the connectors are not always the same at each end.

Multimode fiber optic equipment and components are less expensive than their single-mode counterparts, so OM3 50/125 multimode fiber optic jumpers (or optical patch cords) are widely used in systems where connections need to be made inexpensively.

- Length: 1m

- Mode: OM3 50/125

- Connection: LC / SC

Characteristics :
 
Compatible with IEEE 802.3z (Gigabit LAN), CSMA / CD, TCP / IP
Cabling type: LC single mode fiber (9/125 µm)
Maximum cable length: 10 km
Compatible with the following TP-Link switches: TL-SG3109 / 3216/3224, TL-SL3428 / 3452, TL-SG2109WEB / 2216WEB / 2224WEB, TL-SL2210WEB / 2218WEB / 2428WEB / 2452WEB, TL-SL1351

Characteristics :

Compatible with IEEE 802.3z (Gigabit LAN), CSMA / CD, TCP / IP
Cabling type: LC multimode fiber (50 / 125um or 62.5 / 125um)
Maximum cable length: 550 m
Compatible with the following TP-Link switches: TL-SG3109 / 3216/3224, TL-SL3428 / 3452, TL-SG2109WEB / 2216WEB / 2224WEB, TL-SL2210WEB / 2218WEB / 2428WEB / 2452WEB, TL-SL1351

The pigtail cord TL-ANT200PT is ideal for connecting an external antenna to an access point or an internal router. it is very easy to implement and requires no tools or adjustments.
Cord compatible with 2.4GHz and 5GHz frequencies used by 802.11a, b, g, n, ac wifi networks
Weather resistant designed for external use
Cord formed of a LMR200 cable with low losses and compatible with the 2.4GHz and 5GHz frequencies of the signals it carries
N male and RP-SMA female connectors suitable for all TP-LINK products with detachable antennas.

This shutter allows to block the space of 1U within your 19 '' racks and boxes.

Technical characteristics of the product:
Differential circuit breaker
Width in number of modules: 2
Installation depth: 44 mm
Number of protected poles: 1
Number of poles (total): 2
Pollution degree: 2
Neutral pole sectioned simultaneously: Yes
Nominal breaking capacity according to iec 60947-2 (icu): 10 kA
Energy limitation class (i²t): 3
Immunized against nuisance tripping: No
Voltage type: Ac
Rated voltage (eu): 230 V
Suitable for concealed installation: Yes
Differential current type: Ca
Rated rating / rated current (in): 40 A
Nominal fault sensitivity / current (iδn): 0.3 mA
Impulse current withstand: 0.25 kA
Frequency: 50Hz
Protection index (ip): Ip20
Trigger characteristic (type / curve): C
Flexible cable connection section: 0.75-10 mm²
Rigid cable connection section: 0.75-16 mm²
Nominal breaking capacity according to EN 61009-1 (icn): 6 kA
With locking device:Yes

Specification:

Interface Connections: (2) RJ45 Female Connectors
ESD/EMP Protection: Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/μs
DC Spark-Over Voltage: 90V @ 100V/s
Maximum Impulse Spark-over Voltage: 700V @ 1kV/μs
Discharge Current: 10kA+
Maximum Insulation Resistance: 1G ohm @ 50V
Maximum Capacitance: 1.0 pF @ 1 MHz
Data Line Protection: RJ45 10/100/1000 Ethernet
IEEE 802.3af PoE Support: Yes
Shock and Vibration Certification: ETSI300-019-1.4 Standard