Switch type: managed

RJ-45 Ethernet Port Type: Fast Ethernet (10/100/1000)

Number of RJ45 Ethernet ports: 8

Routing Protocol: IGMPv2, IGMP

Remote Management Protocol: SNMP 1, RMON, Telnet, SNMP 2c, HTTP, HTTPS, TFTP

Authentication method: RADIUS

Switch Type: Unmanaged
RJ-45 Ethernet port type:
Fast Ethernet (10/100)
Number of RJ45 Ethernet ports: 4
Number of RJ45 Ethernet POE ports: 4

CANON ADVANCE DX C257i COLOR COPIER 25ppm 8 RJ45 Gigabit auto-negotiation ports, Auto MDI/MDX function Innovative Green Ethernet technology generates up to 80% energy savings IEEE 802.3x flow control provides reliable data transfer Plastic housing designed for desktop or wall mounting Plug-and-Play, no configuration required

CISCO CATALYST 1000-24T-4G-L 24 PORT MANAGED SWITCH Device Type: Switch - 24 Ports - Managed Enclosure Type: Rack-mountable Sub-Type: Gigabit Ethernet Ports: 24 x 10/100/1000 + 4 x Gigabit SFP (uplink) Performance: Forwarding Bandwidth: 28 Gbps ? Switching Bandwidth: 56 Gbps ? Forwarding Rate (64-byte L3 Packets): 41.67 Mpps Capacity: Unicast MAC Addresses: 15360 ? IPv4 Unicast Direct Routes: 542 ? IPv4 Unicast Indirect Routes: 256 ? IPv6 Unicast Direct Routes: 414 ? IPv6 Unicast Indirect Routes: 128 ? IPv4 Routes (Static): 16 ? IPv6 Routes (Static): 16 ? IPv4 Routes (Multicast): 1024 ? IPv6 Groups (Multicast): 1024 ? IPv4/MAC Security ACEs: 600 ? IPv6 Security ACEs: 600 ? Active VLANs: 256 ? VLAN IDs: 4094 ? STP Instances: 64 ? SPAN Sessions: 4 ? Packet MTU-L3: 9198 bytes Jumbo Frame Support: 10240 bytes Routing Protocol: IGMP, MLDv2, MLD, MSTP, RSTP, STP Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, SSH-2, CLI, NTP, ICMP, DHCP, RSTP, TACACS+, RADIUS Authentication Method: Kerberos, Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2) Features: BOOTP support, ARP support, auto-uplink (auto MDI/MDI-X), IDS, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Dying Gasp Support, sFlow, DHCP snooping, DTP support, PAgP support, ACL support, QoS, UDLD, Rapid PVST+, fanless, SRR, LACP support, LLDP support, MAC address notification, Energy Efficient Ethernet, MIB, CoS, 802.1x authentication, DSCP support, IGMP filtering, IP Source Guard, WTD, SmartPort technology, VTP, STRG, AAA, UDP, proxy ARP, SPAN, loopback detection, MAB, BPDU Guard, NEAT Compliance StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3az, Bluetooth 4.0, IEEE 802.1AX ARM X Processor: 800 MHz RAM: 512 MB Flash: 256 MB Status Indicators: Status Expansion/Connectivity Interfaces24 x 1000Base-T RJ-45 ? 4 x 1000Base-X SFP Uplink ? 1 x RJ-45 Management ? 1 x Mini-USB Type B ? 1 x USB Type A Power Power Device: Internal Power Supply Number Installed: 1 Voltage Required: AC 120/230 V (50 - 60 Hz)

SWITC ALCATEL-Lucent 6360 Managed L2/L3 Gigabit Ethernet (10/100/1000) C This switch’s highlights include: Exceptional performance for real-time voice applications, data flow management and video streaming, ideal for scalable converged networks. Efficient power management reduces operational costs (OPEX) thanks to low power consumption and dynamic PoE allocation that provides the necessary power only to connected devices. Complete access network security at no additional cost. Significant reduction in enterprise operating costs thanks to hardware standardization, enabling network segmentation without the need for additional hardware. Low-cost installation with an automatic configuration system and end-to-end VLAN provisioning. The switch is a fixed configuration chassis in 1U (rack unit) form factor and is equipped with: 24 RJ-45 PoE 10/100/1G BaseT ports for efficient device connectivity. 2 RJ45/SFP combo ports (1G) for versatile connectivity. 2 SFP+ (1G/10G) uplink/stacking ports for high throughput. The switch operates with 180W of power, and it is designed without a fan, ensuring silent operation.

The Ubiquiti UniFi USW-16-POE switch is a configurable Gigabit Layer 2 switch with 16 Gigabit ports, eight of which are 802.3at PoE+ compatible (auto-sensing) and two SFP ports. Its 1.3-inch touchscreen provides status information for efficient management. With a compact depth of 7.9 inches, it can be easily installed in a SOHO rack cabinet. Here are some key features:

Ethernet ports: 16 Gigabit ports

PoE+ ports: 8 ports with a total budget of 42 watts

SFP uplinks: 2 ports

Switching capacity: 32 Gbps

Managed and configured by the UniFi Network Controller, with support for the UniFi mobile app

Advanced Layer 2 switching features, including per-port mode of operation (switching, mirroring, or aggregation)

Redundant power system with USP-RPS in case of power failure

Brand Fortinet

802.11ax wireless communications standard

Compatible devices Laptop, Tablet, Smartphone

Frequency 60

Recommended uses for the Commercial product

Ethernet connectivity technology

Item weight 2 pounds

Number of ports 7

Triple speed user interface (10/100/1000)

Fiber interface (SFP) supporting 1000 base-X optical transceivers

Routing and switching performance at cable speed

High availability with redundant uplinks.

Hot-swappable SFP

Support for duplicate configuration files and images

Improved performance in VoIP and video

Power-optimized 19-inch rack type model.

3 mic inputs on terminal block, 4 ST line inputs on RCA, 4 ST output zones on RCA. 1 RJ45 port per zone for WALL-ZONE4. RS-232 port for control.

Audio Matrix Element: Audio Matrix

Number of entries in total: 7

Number of microphone preamps: 3

Number of outputs in total: 4

Weight (net): 2.75 kg

Managed via UniFi Controller

24 10/100/1000 Mbps ports

16 PoE+ 802.3af/at ports (Eth1 to 16) (PoE budget max. 95 Watts)

2 SFP ports

Allows you to manage VLANs

1.3" LCD screen

Compact and quiet design

Integrated power supply