REPETEUR DE SIGNAL POE HIGH POWER 1 PORT RJ45 GIGABIT

SIGNAL REPEATER POE HIGH POWER 1 PORT RJ45 GIGABIT

FCFA75,000.00

Tax excluded

Reference 560962

In stock 1 Item

Qty

IN STOCK

INT 560962
High power PoE + Gigabit extender repeater 1 port IEEE 802.3at / af Power over Ethernet (PoE + / PoE), metal

The Intellinet 1-port high-power PoE + Gigabit extender repeater, model 560962, is designed to extend the connection distances from a PoE source to an output device by an additional 100 m via a Cat5e or Cat6 cable. You can cover even longer distances by cascading these extensions over a network. The PoE + extender does not need additional power, as it draws the energy it needs from the PoE input.

Simple installation

Reduce wiring costs

Power over Ethernet 802.3at compatible

Cascade power

INT 560962
High power PoE + Gigabit extender repeater 1 port IEEE 802.3at / af Power over Ethernet (PoE + / PoE), metal

Simple installation
Simply connect the "PoE In" port to your PoE injector or PoE switch, and connect the "PoE Out" to the PoE device you wish to connect; for example, a VoIP phone or a PoE network camera. That's it. There is nothing to configure. It just couldn't be simpler.

Reduce wiring costs
No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Extender to the LAN switch port and use the existing Cat5 cabling to provide DC power as well as to transfer data.

Power over Ethernet 802.3at compatible
The 1-port Giginet high-power Gigabit PoE + extender repeater supports the IEEE 802.3at protocol and is designed to transmit data at Gigabit speeds and up to 30 watts of input power to an IEEE 802.3 compatible device af or IEEE 802.3at connected. The length of the cable at both ends can reach 100 meters (328 feet), bringing the total distance to 200 meters (656 feet).

Cascade power
You can daisy chain multiple PoE extensions to further increase the transmission distance. For each PoE extension added, you lose about 4 watts of usable PD power, but if you start with a PoE injector that delivers 30 watts of IEEE 802.3at power - for example, the Intellinet PoE injector (model 560566) - then you have always 12.5 watts for your PoE device, 4 PoE extenders across the line and 500 meters (1640 feet) away.